Farrar V-1 Flying Wing

V-1 Flying Wing
Role Glider
National origin United States
Designer Demetrius F. Farrar Jr.
Introduction 1962
Status Production completed
Number built one

The Farrar V-1 Flying Wing is an American, single-seat, flying wing glider that was designed and constructed by Demetrius F. Farrar Jr. in 1962.[1][2]

Contents

Design and development

The V-1 was an attempt to create a glider design based on the Northrop Corporation flying wing designs of the 1940s, such as the Northrop YB-49.[1]

The aircraft is made from metal and wood, with doped aircraft fabric covering. Its 26 ft (7.9 m) span wing employs a modified Northrop airfoil and tip-mounted ailerons, in the form of rotating wing tips, of 2 ft (0.6 m) each. A single vertical stabilizer and rudder was mounted at the rear of the wing center trailing edge. The cockpit is located within the wing center section and the pilot flies in the prone position.[1]

Only one V-1 was built and it was registered with the Federal Aviation Administration in the Experimental - Amateur-built category.[1][2]

Operational history

In August 2011 the sole V-1 was still listed on the FAA aircraft register and still owned by the designer, 49 years after it was completed.[2]

Specifications (V-1)

Data from Sailplane Directory[1]

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era

Related lists

References